Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Nintendo 3DS Circle Pad Joystick Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. Nintendo 3DS Circle Pad Joystick Replacement, Circle Pad Joystick: adım 1, 1 resimden 1.
    • Remove the two 7.7 mm Phillips screws securing the back of the Circle Pad to the motherboard.

  2. Nintendo 3DS Circle Pad Joystick Replacement: adım 2, 3 resimden 1. Nintendo 3DS Circle Pad Joystick Replacement: adım 2, 3 resimden 2. Nintendo 3DS Circle Pad Joystick Replacement: adım 2, 3 resimden 3.
    • Use the flat end of a spudger to pry the back of the Circle Pad off the motherboard.

    • Lift the Circle Pad joystick off the motherboard and lay it on its back so that the ribbon cable connector is accessible.

  3. Nintendo 3DS Circle Pad Joystick Replacement: adım 3, 3 resimden 1. Nintendo 3DS Circle Pad Joystick Replacement: adım 3, 3 resimden 2. Nintendo 3DS Circle Pad Joystick Replacement: adım 3, 3 resimden 3.
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Circle Pad ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Lift the Circle Pad joystick off the motherboard.

  4. Nintendo 3DS Circle Pad Joystick Replacement: adım 4, 2 resimden 1. Nintendo 3DS Circle Pad Joystick Replacement: adım 4, 2 resimden 2.
    • To decrease the chance of losing it during repairs, you may want to remove the two thin pads underneath the Circle Pad joystick.

    • Use a spudger or screwdriver to lift the pads up and remove them from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

David Hodson

Üyelik tarihi: 04/13/10

150.352 İtibar

127 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 361