Ana içeriğe geç

Giriş

This guide will assist in removing the top cover of the Nintendo 64.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the expansion pack cover by pushing in the tab and pulling out.
    • Remove the expansion pack cover by pushing in the tab and pulling out.

  2. If your system uses a jumper pack, the same procedure applies to remove it.
    • If your system uses a jumper pack, the same procedure applies to remove it.

    • A small spoon can be used in place of a spudger.

    • Lever the expansion pack out using a metal spudger.

  3. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  4. Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.
    • Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.

  5. Remove the two front feet of the N64.
    • Remove the two front feet of the N64.

  6. Rotate to top side up and lift off top cover.
    • Rotate to top side up and lift off top cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

16 farklı kişi bu kılavuzu tamamladı.

bbdiamond13

Üyelik tarihi: 03-11-2009

312 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 5-4, Regan Fall 2009 Cal Poly, Team 5-4, Regan Fall 2009 üyesi

CPSU-REGAN-F09S5G4

7 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 30

Son 30 Gün: 152

Her zaman: 31,766