Giriş

Removing the back panel is simple, provided you have the correct screwdriver. Nintendo uses a special Tri-wing bit for the case, be sure you have one of these before disassembling!

Remove the cartridge from the console.
  • Remove the cartridge from the console.

  • Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case, turning the screw counter-clockwise.

  • Remove the battery door.

Yorum Ekle

Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic open tool or spudger isn't available, your fingernails may work.
  • Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic open tool or spudger isn't available, your fingernails may work.

Yorum Ekle

  • Remove the battery from the Nintendo DS.

Yorum Ekle

  • Remove the 7 Y0 screws located on the back.

  • It might be helpful to remove the strap from the hole to access the top left screw.

Yorum Ekle

  • With your hands, pry the back panel off the main case.

  • Separate the back from the front, and set it aside.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 başka kişi bu kılavuzu tamamladı.

dnguye26

Üyelik tarihi: 28-10-2009

313 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 18-3, Maness Fall 2009 Cal Poly, Team 18-3, Maness Fall 2009 üyesi

CPSU-MANESS-F09S18G3

4 Üyeler

11 adet Kılavuz yazıldı

Bir Yorum

Where do I get a nintendo DS gamepak?

Kayla Maison - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 13

Son 30 Gün: 53

Her zaman: 12,315