Eşyalarını Tamir Et Topluluk Mağaza

Nintendo NES Advantage Start Button Replacement

Giriş

If your Nintendo NES Advantage Model NES-026 Start Button is not being responsive to being pressed, although plugged into NES, you may need to replace the Start Button, using this guide.

The Start Button is an input sensory button used for starting and pausing the game.

Neye ihtiyacın var

  1. Nintendo NES Advantage Start Button Replacement, Back Panel: adım 1, 1 resimden 1.

    • Remove the four sticky pads from the bottom of the device.

    • If the pads are stuck, use a spudger to remove them.

    Düzenle

  2. Nintendo NES Advantage Start Button Replacement: adım 2, 2 resimden 1. Nintendo NES Advantage Start Button Replacement: adım 2, 2 resimden 2.

    • Remove the six 8 mm screws from the bottom of the device with a Phillips #0 screwdriver.

    • Use your hands to pull the back panel away from the controller.

    Düzenle

  3. Nintendo NES Advantage Start Button Replacement, Circuit Board: adım 3, 2 resimden 1. Nintendo NES Advantage Start Button Replacement, Circuit Board: adım 3, 2 resimden 2.

    • Remove the three 14 mm screws from the gray cross with a Phillips #0 screwdriver.

    • Lift the gray component away from the device.

    Düzenle

  5. Nintendo NES Advantage Start Button Replacement: adım 4, 1 resimden 1.

    • Lift up the black wire and move it to the side.

    Düzenle

  6. Nintendo NES Advantage Start Button Replacement: adım 5, 3 resimden 1. Nintendo NES Advantage Start Button Replacement: adım 5, 3 resimden 2. Nintendo NES Advantage Start Button Replacement: adım 5, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Remove the two silver knobs on the front of the device.

    • Unscrew the two silver nuts using a flathead screwdriver.

    • Remove each silver nut and silver washer using a pair of tweezers.

    Düzenle

  7. Nintendo NES Advantage Start Button Replacement: adım 6, 2 resimden 1. Nintendo NES Advantage Start Button Replacement: adım 6, 2 resimden 2.

    • Remove the remaining three 8 mm screws on the circuit board with a Phillips #0 screwdriver.

    • Remove the silver bracket from the top of the circuit board.

    Düzenle

  8. Nintendo NES Advantage Start Button Replacement: adım 7, 1 resimden 1.

    • Remove the circuit board from the controller.

    Düzenle

  9. Nintendo NES Advantage Start Button Replacement, Start Button: adım 8, 1 resimden 1.

    • Remove Start Button.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Sylvia Pena

Üyelik tarihi: 09/06/22

79 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

University of Colorado Denver, Team 1-2, Campeau Fall 2022 University of Colorado Denver, Team 1-2, Campeau Fall 2022 üyesi

UCDENVER-CAMPEAU-F22S1G2

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 10

Her zaman: 184