Ana içeriğe geç

Giriş

Use this guide to replace your Wii's faceplate. Replacing the faceplate will provide new blue LEDs that light up around the optical drive opening.

  1. Nintendo Wii Faceplate Replacement, Faceplate: adım 1, 2 resimden 1. Nintendo Wii Faceplate Replacement, Faceplate: adım 1, 2 resimden 2.
    • Use a metal spudger to remove the white plastic screw covers stuck to the lower case near the front of the Wii.

  2. Nintendo Wii Faceplate Replacement: adım 2, 1 resimden 1.
    • Remove the two 8.3 mm Tri-Wing screws hidden under the covers you just removed.

  3. Nintendo Wii Faceplate Replacement: adım 3, 1 resimden 1.
    • Remove the single 5.9 mm Phillips screw under the controller port door nearest the faceplate.

  4. Nintendo Wii Faceplate Replacement: adım 4, 1 resimden 1.
    • Use a metal spudger to remove the rubber foot stuck to the side of the Wii near the DVD drive opening.

  5. Nintendo Wii Faceplate Replacement: adım 5, 1 resimden 1.
    • Remove the single 5.9 mm Phillips screw hidden under the foot you just removed.

  6. Nintendo Wii Faceplate Replacement: adım 6, 2 resimden 1. Nintendo Wii Faceplate Replacement: adım 6, 2 resimden 2.
    • Carefully pull the faceplate away from the front of the Wii.

    • Use a pair of tweezers to disconnect the LED cable's plastic connector from the motherboard.

    • Remove the faceplate.

Sonuç

To reassemble your device, follow these instructions in reverse order.

20 farklı kişi bu kılavuzu tamamladı.

2 Comments

Any more to do if pressing the on button does nothing, its still red power light?

Kyrre - Yanıt

Tanks for this guide Btw

Kyrre - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 13

Son 7 gün: 66

Son 30 gün: 324

Her zaman: 47,513