Eşyalarını Tamir Et Topluluk Mağaza

Nintendo Wii U Pro Controller D-Pad Replacement

Giriş

We pick up where we left off after removing the joysticks. To reach the D-Pad, we will first remove the motherboard.

Neye ihtiyacın var

  1. Nintendo Wii U Pro Controller D-Pad Replacement, Battery: adım 1, 1 resimden 1.

    • Turn the controller over to reveal the battery cover.

    • Use the J000 screwdriver to remove the screw that secures the battery cover.

    Düzenle

  2. Nintendo Wii U Pro Controller D-Pad Replacement: adım 2, 2 resimden 1. Nintendo Wii U Pro Controller D-Pad Replacement: adım 2, 2 resimden 2.

    • Remove the battery from the controller by inserting the plastic spudger into the small gap on the bottom right of the battery.

    • Use the spudger as a lever to pry up and remove the battery from the compartment.

    Düzenle

  3. Nintendo Wii U Pro Controller D-Pad Replacement, Joystick: adım 3, 1 resimden 1.

    • Remove the eight 5.5 mm Y0 screws.

    Düzenle

  4. Nintendo Wii U Pro Controller D-Pad Replacement: adım 4, 2 resimden 1. Nintendo Wii U Pro Controller D-Pad Replacement: adım 4, 2 resimden 2.

    • Now that you have removed all of the screws, carefully separate and remove the bottom half of the controller shell from the top half.

    • If you feel any resistance when pulling the shells apart, use a spudger to separate the left and right trigger contact assemblies from the bottom shell.

    Düzenle

  6. Nintendo Wii U Pro Controller D-Pad Replacement: adım 5, 1 resimden 1.

    • Move the right trigger and sensor out of the way.

    • Remove the 4 mm JIS #0 screw.

    Düzenle

  7. Nintendo Wii U Pro Controller D-Pad Replacement: adım 6, 1 resimden 1.

    • Move the left trigger and sensor out of the way.

    • Remove the 4 mm JIS #0 screw.

    Düzenle

  8. Nintendo Wii U Pro Controller D-Pad Replacement: adım 7, 1 resimden 1.

    • Remove the joysticks and motherboard from the controller’s shell.

    Düzenle

  9. Nintendo Wii U Pro Controller D-Pad Replacement: adım 8, 1 resimden 1.

    • Carefully pull the rubber thumbsticks off of the electronic bearings to remove the joysticks.

    Düzenle

  10. Nintendo Wii U Pro Controller D-Pad Replacement, D-Pad: adım 9, 1 resimden 1.

    • Locate the two 4 mm motherboard screws, shown circled in red, with the J0 screwdriver.

    Düzenle

  11. Nintendo Wii U Pro Controller D-Pad Replacement: adım 10, 1 resimden 1.

    • Remove the motherboard and connected components. The rubber pad of the D-Pad is indicated in the image by the red arrow.

    Düzenle

  12. Nintendo Wii U Pro Controller D-Pad Replacement: adım 11, 1 resimden 1.

    • Remove the rubber pad and D-Pad button. The D-Pad can be replaced by the new D-Pad or be cleaned to improve condition.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Jesse Burton

Üyelik tarihi: 09/17/15

586 İtibar

3 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

IUPUI, Team 2-2, Harley Fall 2015 IUPUI, Team 2-2, Harley Fall 2015 üyesi

IUPUI-HARLEY-F15S2G2

4 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 45

Her zaman: 4,426