Ana içeriğe geç

Giriş

Keeping your device water-proof is paramount in using it to its full potential. Follow this guide to replace the water-proofing O-ring.

Parçalar

Hiçbir parça belirtilmedi.

  1. Grasp the clear cover and the white housing and twist the cover counter-clockwise.
    • Grasp the clear cover and the white housing and twist the cover counter-clockwise.

    • The lid may hold fast, but it will come off with some firm twisting.

  2. Lift the lid from the device
    • Lift the lid from the device

    • It may be helpful to use a spudger to pry under the lid if there is difficulty in getting a good grip on the smooth plastic.

  3. Using a plastic spudger, lift the o-ring from the lid Using a plastic spudger, lift the o-ring from the lid Using a plastic spudger, lift the o-ring from the lid
    • Using a plastic spudger, lift the o-ring from the lid

  4. Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads
    • Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads

Sonuç

To reassemble your device, follow these instructions in reverse order.

Vinny Capone

Üyelik tarihi: 18-10-2013

549 İtibar

5 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 2-4, Gulbrandsen Fall 2013 UMass Dartmouth, Team 2-4, Gulbrandsen Fall 2013 üyesi

UMASSD-GULBRANDSEN-F13S2G4

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 105