Giriş

Replacing the faceplate is very quick and simple to do.

To prevent shock, press down on the power button located on the top of the phone until the phone shuts off. Press down on the small gray button located on the back of the phone. Slide the back plate down and off.
  • To prevent shock, press down on the power button located on the top of the phone until the phone shuts off.

  • Press down on the small gray button located on the back of the phone.

  • Slide the back plate down and off.

Yorum Ekle

To remove the battery, begin by holding the phone sideways. Then, insert your thumb in the groove below the battery and push the battery up and out.
  • To remove the battery, begin by holding the phone sideways.

  • Then, insert your thumb in the groove below the battery and push the battery up and out.

Yorum Ekle

Locate the spudger. A photo of the correct spudger is provided to the left. Turn the front of the phone to face you. Find the two small square holes on the bottom left and right sides of the faceplate. Insert the spudger into each square hole and push up to detach the face plate.
  • Locate the spudger. A photo of the correct spudger is provided to the left.

  • Turn the front of the phone to face you. Find the two small square holes on the bottom left and right sides of the faceplate.

  • Insert the spudger into each square hole and push up to detach the face plate.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Shane

Üyelik tarihi: 30-09-2010

56 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 14-38, Forte Fall 2010 Cal Poly, Team 14-38, Forte Fall 2010 üyesi

CPSU-FORTE-F10S14G38

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 1,399