Giriş

This guide requires that the front plate, keypad, circuit board, back cover, and battery all be removed.

Parçalar

Hiçbir parçaya gerek yok.

  1. Pull up on both of the clips near the bottom of the phone as shown.
    • Pull up on both of the clips near the bottom of the phone as shown.

    • Lift off the front plate.

    Yorum Ekle

  2. The keypad and LCD screen are revealed.
    • The keypad and LCD screen are revealed.

    Yorum Ekle

    • Separate the keypad from the phone and place aside.

    • Wipe off any excess dust from where the keypad was attached to the phone.

    Yorum Ekle

    • Remove the six screws highlighted by the markers using the screwdriver.

    Yorum Ekle

    • Separate the inside of the phone from the back of the phone.

    Yorum Ekle

    • Locate vibration device on the bottom of the back cover.

    • Pull up on the vibration device using tweezers.

    • Remove the vibration device and place it aside.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Reid Polstra

Üyelik tarihi: 22-10-2012

1 İtibar

7 adet Kılavuz yazıldı

Takım

Clemson, Team 15-5, Benson Fall 2012 Clemson, Team 15-5, Benson Fall 2012 üyesi

CLEM-BENSON-F12S15G5

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 437