Start with the phone in the flipped open position.
  • Start with the phone in the flipped open position.

  • You must remove the sticker in the center, below the screen to reveal the center screw.

  • Use a T5 screwdriver to remove all three screws, loosening the front screen.

Yorum Ekle

Flip the phone to the closed position and turn to the front screen.
  • Flip the phone to the closed position and turn to the front screen.

  • The front cover will now be loose enough for you to remove by grabbing the edges and lightly pulling the cover off.

Yorum Ekle

  • With the front cover off, the screen and keypad should be loose.

Yorum Ekle

  • Using a plastic opening tool pry up the cable connecting the LCD screen to the rest of the phone.

  • With the cable disconnected, the screen should be free for removal or replacement.

Yorum Ekle

  • After removing the front screen and front keypad, your device should look like this.

Yorum Ekle

  • Using the T5 Screwdriver, remove the two screws shown.

Yorum Ekle

  • Make sure to remove the connection shown by gently easing the plastic opening tool underneath the connection and lightly prying the connection apart.

Yorum Ekle

  • Gently, lift the board up to reveal the front screen.

Yorum Ekle

  • Using the plastic opening tool, lift and remove the inside screen.

Yorum Ekle

Sonuç

In order to install a new screen, simply follow the steps in reverse order with the new screen.

3 başka kişi bu kılavuzu tamamladı.

Cameron Weinberg

Üyelik tarihi: 12-04-2011

444 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 18-21, Garner Spring 2011 Cal Poly, Team 18-21, Garner Spring 2011 üyesi

CPSU-GARNER-S11S18G21

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 6

Son 30 Gün: 13

Her zaman: 4,418