Ana içeriğe geç

Giriş

How to disassemble the phone and change broken digitizer glass, LCD display, earpiece, loudspeaker, etc.


Videoya Genel Bakış

  1. Switch off the phone and remove any SIM and memory card. There are two tips T4 screws. There are two tips T4 screws.
    • Switch off the phone and remove any SIM and memory card.

    • There are two tips T4 screws.

  2. Use a plastic tool to separate the back case. Loudspeaker / Ringer
    • Use a plastic tool to separate the back case.

    • Loudspeaker / Ringer

  3. Disconnect the Touchscreen and the LCD display flex cables. The logic board is held by tho locking clips. Use plastic tools to remove it. The logic board is held by tho locking clips. Use plastic tools to remove it.
    • Disconnect the Touchscreen and the LCD display flex cables.

    • The logic board is held by tho locking clips. Use plastic tools to remove it.

  4. Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın
  5. Light proximity sensor
    • Light proximity sensor

    • Earpiece

    • Audio jack connector

  6. Again use a plastic tool to separate the middle frame and the digitizer frame. Again use a plastic tool to separate the middle frame and the digitizer frame. Again use a plastic tool to separate the middle frame and the digitizer frame.
    • Again use a plastic tool to separate the middle frame and the digitizer frame.

  7. This step is for those who wants to change the LCD display. Use a sharp object to pick up a little the display. Then with a spudger or a similar tool separate the display from the frame.
    • This step is for those who wants to change the LCD display.

    • Use a sharp object to pick up a little the display.

    • Then with a spudger or a similar tool separate the display from the frame.

  8. Put some transparent tape on the broken glass. Use hot air to warm and soften the old adhesive tape. Start the separating from the middle, where the contact area is small.
    • Put some transparent tape on the broken glass.

    • Use hot air to warm and soften the old adhesive tape.

    • Start the separating from the middle, where the contact area is small.

  9. Clean the frame Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape. Install the new touch screen and start with reassembling.
    • Clean the frame

    • Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape.

    • Install the new touch screen and start with reassembling.

  10. That's all.
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Sonuç

To reassemble your device, follow these instructions in reverse order.

11 farklı kişi bu kılavuzu tamamladı.

ZFix

Üyelik tarihi: 09-12-2013

166.837 İtibar

305 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

290 Üyeler

822 adet Kılavuz yazıldı

Bir Yorum

Toughees Telecom the most perfect place for <b>Lumia Screen Repair</b>

You don’t need to worry because we are with you at every step of <a href="http://www.tougheestelecom.in/nokia-lumi... title="Nokia Lumia Repair in Delhi">Lumia screen repair in Delhi</a>, as we understand what one feels when a customer has his <b>Screen Broken or Damaged</b>. You can call us and we will give you the best advice regarding <b>Lumia Screen Repair</b> in Delhi.

Sachin Seth - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 13

Son 30 Gün: 28

Her zaman: 6,502