Ana içeriğe geç

Giriş

Nokia Lumia 625 - how to remove / replace the back / rear bezel.

  1. Turn off the phone and remove the back cover. Remove any installed SIM or memory card. Use a screwdriver Torx T5 and remove the 8x black screws.
    • Turn off the phone and remove the back cover.

    • Remove any installed SIM or memory card.

    • Use a screwdriver Torx T5 and remove the 8x black screws.

  2. At the top and bottom of the phone you'll see two grooves. Use a plastic tool and start the separating the rear bezel from here. Use a plastic tool and start the separating the rear bezel from here.
    • At the top and bottom of the phone you'll see two grooves.

    • Use a plastic tool and start the separating the rear bezel from here.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

ZFix

Üyelik tarihi: 09-12-2013

181.574 İtibar

330 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

300 Üyeler

1.016 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 1,164