Ana içeriğe geç

Giriş

This guide does not require any prerequisite information to complete. It can be completed by anyone given the proper tools. Screen replacement should be done for any device that has a broken screen or has an unresponsive screen that may need to be changed out. This guide will detail how to do it. There are small parts involved in this replacement, so care should be taken not to lose some of the pieces.

  1. Insert the pointed end of the spudger into the sim card port indicated by the picture. Then proceed to remove the sim card port entirely. Insert the pointed end of the spudger into the sim card port indicated by the picture. Then proceed to remove the sim card port entirely.
    • Insert the pointed end of the spudger into the sim card port indicated by the picture. Then proceed to remove the sim card port entirely.

  2. Use tweezers to remove the small rod in the port indicated in the picture. Use tweezers to remove the small rod in the port indicated in the picture.
    • Use tweezers to remove the small rod in the port indicated in the picture.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Separate the screen from the motherboard by prying it open with the spudger  along with pulling upwards with the suction cup. Separate the screen from the motherboard by prying it open with the spudger  along with pulling upwards with the suction cup.
    • Separate the screen from the motherboard by prying it open with the spudger along with pulling upwards with the suction cup.

  5. Gently pull apart the screen from the motherboard, with only the ribbons connected from the motherboard to the screen. Gently pull apart the screen from the motherboard, with only the ribbons connected from the motherboard to the screen.
    • Gently pull apart the screen from the motherboard, with only the ribbons connected from the motherboard to the screen.

  6. Disconnect the No-fuss cables from the motherboard by gently prying them up using the black nylon spudger.
    • Disconnect the No-fuss cables from the motherboard by gently prying them up using the black nylon spudger.

    • Remove the screen.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Tyler Bui

Üyelik tarihi: 15-02-2017

117 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team 10-6, Remmell Spring 2017 USF Tampa, Team 10-6, Remmell Spring 2017 üyesi

USFT-REMMELL-S17S10G6

3 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 3

Son 30 Gün: 7

Her zaman: 378