1. Remove the sim card holder by inserting tweezers into the hole. Push down and the holder will spring back up.
    • Remove the sim card holder by inserting tweezers into the hole. Push down and the holder will spring back up.

    • Pull out the holder until it is completely separate.

    • Something like a paperclip will work if there are no tweezers available.

  2. Slide a plastic opening tool under the back cover.
    • Slide a plastic opening tool under the back cover.

    • Slide the tool around the outsides of the cover to fully dislodge the pins holding the cover to the phone.

    • Some pins are facing the opposite way from the others.

    • Remove the 3 screws using the T7 Torx screwdriver.

    • Unclip the black tab connector.

    • Remove the silver metal cover.

    • Unclip the two orange tabs.

    • Remove the four silver screws using the T5 Torx screwdriver.

    • Remove the motherboard by sliding tweezers between it and the back of the screen. Lift up.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 55

Her zaman: 63