Parçalar

Hiçbir parçaya gerek yok.

  1. Orient the phone as shown.
    • Orient the phone as shown.

    • Press the button with the plastic opening tool and slide the back case downward relative to the phone.

    Yorum Ekle

  2. Remove the battery cover by lifting it away from the phone.
    • Remove the battery cover by lifting it away from the phone.

    Yorum Ekle

    • Insert the plastic opening tool into the marked space.

    • Lift up the side of the battery closest to the bottom edge of the phone using the plastic opening tool.

    Yorum Ekle

    • Remove the battery from the phone.

    Yorum Ekle

    • Insert the plastic opening tool in the marked areas in between the front and back covers.

    • Pry each corner with the plastic opening tool until the front case completely detaches.

    Yorum Ekle

    • Orient the phone so that the keypad is facing you.

    • Remove the keypad by lifting it away from the phone.

    Yorum Ekle

    • Use the T6 Torx screwdriver to remove the six 15 mm Torx screws.

    Yorum Ekle

    • Lift the bottom edge of the front panel at a 45 degree angle.

    • Remove front panel by slowly pulling it away from the phone at a 45 degree angle.

    Yorum Ekle

    • Locate the speaker location located on the back panel of the phone.

    • Using the tweezers place one side of tweezers in the rectangular slot where the speaker is located

    • Slowly lift speaker away from the back panel.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Justin

Üyelik tarihi: 12-10-2011

933 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-2, Regan Fall 2011 Cal Poly, Team 6-2, Regan Fall 2011 üyesi

CPSU-REGAN-F11S6G2

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 4

Son 30 Gün: 9

Her zaman: 3,759