Neye ihtiyacın var
-
-
Remove the back cover by locating the slit on the bottom of the phone and lifting up.
-
-
-
-
Remove the two "L-shaped" antennas by unscrewing the following screws:
-
Four screw M1 .4x5.0
-
Two screw RF1 .4x4
-
In addition to unscrewing the screws, remove the B-Cover (which will fall right out without the screws).
-
-
-
You will now have two halves of the phone.
-
Grab the half of the phone that has the keyboard on it
-
-
-
Remove the keyboard by unsnapping the frame and then lifting the pad out from the device.
-
Place the key pad and cover to the side for the remaining steps.
-
-
-
Use a blue plastic opening tool lift the motherboard out of the back cover
-
-
-
Look at the bottom of the motherboard to find the:
-
USB Port
-
Once you've located the USB Port you can search online or call the manufacturer to replace it.
-
FixBot'a Sor
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
3 farklı kişi bu kılavuzu tamamladı.
Ekip
New Mexico State, Team 1-4, Easley Spring 2014 New Mexico State, Team 1-4, Easley Spring 2014 üyesi
NMSU-EASLEY-S14S1G4
4 Üyeler
4 adet Kılavuz yazıldı
