Giriş

This guide will help you replace the handset in your Nortel Networks i2004 IP telephone. You may need to replace your handset if the microphone or speaker in the handset is not working.

Turn phone over to view the back. Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling striaght out.
  • Turn phone over to view the back.

  • Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling striaght out.

Yorum Ekle

Disconnect the telephone cord from the handset the same way as the previous step. Disconnect the telephone cord from the handset the same way as the previous step.
  • Disconnect the telephone cord from the handset the same way as the previous step.

Yorum Ekle

Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.
  • Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Morgan Zandonella

Üyelik tarihi: 22-01-2012

49 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 10-35, Amido Winter 2012 Cal Poly, Team 10-35, Amido Winter 2012 üyesi

CPSU-AMIDO-W12S10G35

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 5

Her zaman: 1,097