Ana içeriğe geç

Giriş

Use this guide to replace the stands on the bottom of the device if they are missing or damaged.

Aletler

Hiçbir alet belirtilmedi.

  1. Unplug the device before following this guide. First, place the device on its side, making sure the switch is not facing down.
    • Unplug the device before following this guide.

    • First, place the device on its side, making sure the switch is not facing down.

    • Remove the eight 12mm Phillips #02 screws from the base.

  2. Gently separate the panel from the device.
    • Gently separate the panel from the device.

    • Be sure not to tug at the wires that are still connected.

  3. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  4. Locate the four 10mm Phillips #02 screws on the inside of the panel.
    • Locate the four 10mm Phillips #02 screws on the inside of the panel.

  5. Remove the screw of the foot you plan to replace. Place your finger on the back of the the foot you are unscrewing for support. Place your finger on the back of the the foot you are unscrewing for support.
    • Remove the screw of the foot you plan to replace.

    • Place your finger on the back of the the foot you are unscrewing for support.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Carlton

Üyelik tarihi: 13-01-2015

633 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 3-5, Hickman Winter 2015 USF Tampa, Team 3-5, Hickman Winter 2015 üyesi

USFT-HICKMAN-W15S3G5

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 238