Giriş

If the device will not turn on or has a broken power switch, use this guide to replace the switch.

  1. Unplug popper.
    • Unplug popper.

    • Remove plastic lid by picking the lid up.

    Yorum Ekle

  2. Flip the popper on its side.
    • Flip the popper on its side.

    • Remove the screws on the bottom with the Phillips #2 phillips head screwdriver.

    • There are seven screws on the base. Five screws on the perimeter (12mm Philips #2 screws) and two in the middle (15 mm Philips #2 screws).

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Remove the base.

    • Save the screws you took out of the bottom in a safe place. They will be needed to reattach the housing to the base.

    • Unscrew the two screws (10 mm Philips #2 screws) from the base.

    • Remove the base and set it aside for now.

    Yorum Ekle

    • Locate the power switch connected to the side of the housing.

    • Carefully pinch the sides of the power switch.

    • Push the power button up and out of the housing.

    Yorum Ekle

    • Now that the power switch is removed from the housing, you have to remove the wires connected to the power switch.

    • Use the plastic opening tool to gently pry the wires loose from the power switch.

    • The wires should pop easily out from the power switch.

    Yorum Ekle

    • Remove the power switch from the device.

    • You can now replace the power switch if necessary.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Dana Clarke

Üyelik tarihi: 26-09-2012

26 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 16-57, Forte Fall 2012 Cal Poly, Team 16-57, Forte Fall 2012 üyesi

CPSU-FORTE-F12S16G57

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 662