Eşyalarını Tamir Et Topluluk Mağaza

Nostalgia GCM200 Power Button Replacement

Giriş

It's a simple process to replace the parts of this device. Once you have the device opened, these items can be changed: power button, power cable, heating bowl, and heating coil/pan Etc.

Neye ihtiyacın var

  1. Nostalgia GCM200 Power Button Replacement, Nostalgia GCM200 Disassembly: adım 1, 2 resimden 1. Nostalgia GCM200 Power Button Replacement, Nostalgia GCM200 Disassembly: adım 1, 2 resimden 2.

    • Remove the two 1.3 mm Phillips #2 screws.

    • Remove the S6 spanner screw.

    • Carefully place these three screws somewhere safe to use later in reassembly.

    Düzenle

  2. Nostalgia GCM200 Power Button Replacement: adım 2, 1 resimden 1.

    • Split the device in half to expose the internal parts of the device.

    • Again, there are two more Phillips screws to remove.

    Düzenle

  3. Nostalgia GCM200 Power Button Replacement: adım 3, 1 resimden 1.

    • Remove the two screws from both sides of the heating coil.

    Düzenle

  5. Nostalgia GCM200 Power Button Replacement, Power Button: adım 4, 1 resimden 1.

    • Split the device into 2 parts to change the power button.

    • Power button hold the other parts, so be careful.

    Düzenle

  6. Nostalgia GCM200 Power Button Replacement: adım 5, 1 resimden 1.

    • Remove (flexible) plastic sleeves from the inside end of the power cable.

    • You might want to use force, pull out while shaking it.

    • Inside the product, ensure you look at the power button and try to understand this step before you take action. There are two notches, push them at the same time on both sides to push the button out of the device.

    Düzenle

  7. Nostalgia GCM200 Power Button Replacement: adım 6, 1 resimden 1.

    • Depress the little tab inside the top portion of the device to remove the On/Off switch.

    Düzenle

  8. Nostalgia GCM200 Power Button Replacement: adım 7, 1 resimden 1.

    • Replace the power button, and put the plastic sleeves in the original position.

    • Great, you just finished replacing power button

    Düzenle

  9. Nostalgia GCM200 Power Button Replacement: adım 8, 1 resimden 1.

    • To reassemble your device, follow these instructions in reverse order.

    Düzenle
Sonuç

This guide will help you to replace the power button

3 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Xingdi Zhou

Üyelik tarihi: 06/27/17

466 İtibar

3 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

UW Tacoma, Team S1-G4, Liner Summer 2017 UW Tacoma, Team S1-G4, Liner Summer 2017 üyesi

UWT-LINER-SU17S1G4

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 185