Giriş
This is a replacement guide that teaches you how to replce power cable for Nostalgia GCM-200.
Neye ihtiyacın var
-
-
Remove the two 1.3 mm Phillips #2 screws.
-
Remove the S6 spanner screw.
-
-
-
-
Remove (flexible) plastic sleeves from the inside end of the power cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.