Ana içeriğe geç

Giriş

Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.

  1. Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws). 2 of the screws will be star shaped rather than phillips head.
    • Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).

    • 2 of the screws will be star shaped rather than phillips head.

    • Remove the base plate.

  2. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  3. Identify the red and black wires topped with white-clear caps. Use pliers to squeeze the flattened part of both caps.
    • Identify the red and black wires topped with white-clear caps.

    • Use pliers to squeeze the flattened part of both caps.

    • The black and red wires attached to the power cord should be loose and ready to pull out.

  4. Replace the cord by slipping the new cord's black and red wires into the caps.
    • Replace the cord by slipping the new cord's black and red wires into the caps.

    • Pinch the middle of the cap back to the flattened position using the pliers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Allie Decker

Üyelik tarihi: 26-09-2017

125 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team S7-G1, Banghart Fall 2017 Cal Poly, Team S7-G1, Banghart Fall 2017 üyesi

CPSU-BANGHART-F17S7G1

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 12

Son 30 Gün: 49

Her zaman: 440