Giriş

This guide will show you how to access the screen on your OLPC XO 1.5.

Parçalar

Hiçbir parçaya gerek yok.

  1. Place the laptop upside down with the handle away from you.
    • Place the laptop upside down with the handle away from you.

    Yorum Ekle

  2. Slide the tabs out, towards the green edges,  to show the open lock symbol.
    • Slide the tabs out, towards the green edges, to show the open lock symbol.

      • The right tab will stay in place, but the left tab must be held in position while you remove the battery.

    Yorum Ekle

    • Lift the middle of the battery to remove it.

    Yorum Ekle

    • Turn the laptop so it is resting on its bottom.

    • Open the laptop by rotating the green wings on the side up, then lifting the top half of the laptop.

    • Rotate the top half of the laptop about 90 degrees.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Turn the laptop upside down, so you can see the screws on the bottom of the top half.

    • Remove the two 4mm screws with a Phillips #1 screwdriver.

    • Rotate the top half 180 degrees.

    • Remove the two 4mm screws with a Phillips #1 screwdriver.

    Yorum Ekle

    • Rotate the top of the laptop 90 degrees, so that it is facing you again.

    • Slide the green pieces off the device. They should come off easily.

    Yorum Ekle

    • Pull down on the white screen cover. It does not require much force.

    • Remove the screen cover.

    • The game pad on the left sometimes falls during this step.

    Yorum Ekle

    • Unscrew the four 7.62mm Phillips #1 screws on either side of the screen.

    • The screen is still connected by ribbon cables. You can damage the cables if you remove the screen before disconnecting the cables.

    • Move the screen down a little to expose the ribbon cables.

    Yorum Ekle

    • Flip up the tab right under the middle top of the screen.

    • Pull the black ribbon cable out of the socket.

    Yorum Ekle

    • Flip up the smaller tab under the left side of the screen.

    • Remove the small cable to separate the screen from the rest of the laptop.

    • Gently remove the screen.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Ferrell

Üyelik tarihi: 05-10-2012

21 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 3-19, Amido Fall 2012 Cal Poly, Team 3-19, Amido Fall 2012 üyesi

CPSU-AMIDO-F12S3G19

6 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,895