Eşyalarını Tamir Et Topluluk Mağaza
Onarım Topluluğuna Katılın - Hesap Oluşturun

ORFELD EV-660-S222 Battery LED Board Replacement

Giriş

If the LEDs for the battery life indicator on your ORFELD EV-660 have gone out, it can make it impossible to tell how much charge you have left and how long you can continue to vacuum for. Make sure to exercise caution when desoldering wires.

Neye ihtiyacın var

  1. ORFELD EV-660-S222 Battery LED Board Replacement, Battery LED Board: adım 1, 1 resimden 1.

    • Separate the dust cover and the motor from the vacuum body by pressing the eject button.

    Düzenle

  2. ORFELD EV-660-S222 Battery LED Board Replacement: adım 2, 2 resimden 1. ORFELD EV-660-S222 Battery LED Board Replacement: adım 2, 2 resimden 2.

    • Place the vacuum on its side, with the screws facing towards you.

    • Remove the 11.5 mm screws using a Phillips #1 screwdriver.

    Düzenle

  3. ORFELD EV-660-S222 Battery LED Board Replacement: adım 3, 2 resimden 1. ORFELD EV-660-S222 Battery LED Board Replacement: adım 3, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using tweezers, remove the sticker connecting the two halves.

    • Use the opening pick to gently separate the top half and the bottom half of the vacuum.

    • Press the blue buttons near the sides of the battery LEDs to remove the top half.

    Düzenle

  5. ORFELD EV-660-S222 Battery LED Board Replacement: adım 4, 2 resimden 1. ORFELD EV-660-S222 Battery LED Board Replacement: adım 4, 2 resimden 2.

    • Slide out the charging port.

    Düzenle

  6. ORFELD EV-660-S222 Battery LED Board Replacement: adım 5, 1 resimden 1.

    • Lift the battery slightly to reveal the pin connectors.

    • Gently disconnect the six-pin connector that connects to the power button and battery LEDs.

    Düzenle

  7. ORFELD EV-660-S222 Battery LED Board Replacement: adım 6, 3 resimden 1. ORFELD EV-660-S222 Battery LED Board Replacement: adım 6, 3 resimden 2. ORFELD EV-660-S222 Battery LED Board Replacement: adım 6, 3 resimden 3.

    • Slide out the battery LEDs from the compartment.

    • Remove the plastic LED cover from the LED board.

    Düzenle

  8. ORFELD EV-660-S222 Battery LED Board Replacement: adım 7, 1 resimden 1.

    • Desolder the LED board from the wires.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Sarthak Shrestha

Üyelik tarihi: 09/12/23

462 İtibar

3 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

University of North Texas, Team 2-4, Harold Fall 2023 University of North Texas, Team 2-4, Harold Fall 2023 üyesi

UNT-HAROLD-F23S2G4

4 Üyeler

5 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 9

Son 30 gün: 44

Her zaman: 877