Ana içeriğe geç

Aletler

Parçalar

  1. Place the chair horizontally, putting it on its side.
    • Place the chair horizontally, putting it on its side.

  2. The base is connected to the chair either with retaining clips or nuts and bolts at its center.
    • The base is connected to the chair either with retaining clips or nuts and bolts at its center.

    • Remove the retaining clips or unscrew the nuts and bolts with a wrench or drill.

    • Remove the base of the chair.

  3. Place a pipe wrench on the gas cylinder, and spray it with WD-40 to lubricate it and make it easier to remove.
    • Place a pipe wrench on the gas cylinder, and spray it with WD-40 to lubricate it and make it easier to remove.

    • Twist and pull the wrench to loosen the cylinder and remove it from its place.

  4. Look up the chair's part number to find which gas cylinders are compatible with your chair.
    • Look up the chair's part number to find which gas cylinders are compatible with your chair.

  5. Be sure to follow the instructions for your specific gas cylinder, since installation procedures may vary.
    • Be sure to follow the instructions for your specific gas cylinder, since installation procedures may vary.

    • Place the tapered part of the cylinder into the column and rotate it into place.

    • Reconnect the base of the chair.

    • Place the chair upright and adjust the chair to your preferred height. Test it out by sitting on it.

Bitiş Çizgisi

Christian Phillip

Üyelik tarihi: 20-09-2020

124 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 31

Son 30 gün: 95

Her zaman: 734