Olympus D590 Face Plate Replacement - iFixit Tamir Kılavuzu

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Giriş

Removal of the front plate to get into the logic board, lens, etc.

Neye ihtiyacın var

Adım 1 Face Plate

Olympus D590 Face Plate Replacement, Face Plate: adım 1, 1 resimden 1.

Flip camera so you are looking at the bottom.
Unscrew all 5 base plate screws.

Adım 2

Olympus D590 Face Plate Replacement: adım 2, 1 resimden 1.

Lift open retainer clip by sliding the clip to the left and letting the clip pop up.

Adım 3

Olympus D590 Face Plate Replacement: adım 3, 1 resimden 1.

Unscrew the single screw located next to the battery slot.

Adım 4

Olympus D590 Face Plate Replacement: adım 4, 1 resimden 1.

Turn the camera so that the USB, AV and DC in/out rubber plate it facing you.
Lift the rubber plate exposing the ports beneath.

Adım 5

Olympus D590 Face Plate Replacement: adım 5, 1 resimden 1.

Unscrew the 2 screws next to the USB and AC ports.

Adım 6

Olympus D590 Face Plate Replacement: adım 6, 1 resimden 1.

Use a flathead screwdriver or another flat opening tool to pry the faceplate from the whole device.

Adım 7

Olympus D590 Face Plate Replacement: adım 7, 1 resimden 1.

Pull off the faceplate to reveal the inside of the camera.
Be careful of the connector that goes from the faceplate to the motherboard . Disconnecting this line will cause the camera not not power on through the on/off switch anymore.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

11 tane daha katılımcı ile

Katie

Üyelik tarihi: 04/15/10

31 İtibar

3 adet Kılavuz yazıldı

+4 tane daha rozet

Ekip

Cal Poly, Team 28-23, Regan Spring 2010 Cal Poly, Team 28-23, Regan Spring 2010 üyesi

CPSU-REGAN-S10S28G23

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 1,600