Olympus Digital Camera TG-3 Lens Ring Replacement

Giriş

This guide requires you to handle sharp metal objects. Proceed with caution. To avoid misplacing the screws hold them in place with masking tape. Make sure your hands are clean and dry before they come in contact with the internal parts of the camera.

Neye ihtiyacın var

Adım 1 Front Case

Olympus Digital Camera TG-3 Lens Ring Replacement, Front Case: adım 1, 1 resimden 1.

Locate the strap eyelet side of the camera and use the PH000 screwdriver to remove the two 5.3mm screws that hold the strap.

Düzenle

Adım 2

Locate the side of the camera containing the HDMI port. Use the PH000 screwdriver to remove the 5.4mm screw located on the lower left side below the port.

Düzenle

Adım 3

Using the PH000 screwdriver, remove the 3.8mm screw located inside the HDMI port.

Düzenle

Adım 4

Locate the bottom section of the camera. Using the PH000 screwdriver, remove the two 4mm screws located towards the middle (near the battery compartment).

Düzenle