Eşyalarını Tamir Et Topluluk Mağaza

Olympus SZ-12 Back Case Replacement

Giriş

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Neye ihtiyacın var

  1. Olympus SZ-12 Back Case Replacement, Back Case: adım 1, 2 resimden 1. Olympus SZ-12 Back Case Replacement, Back Case: adım 1, 2 resimden 2.

    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

    Düzenle

  2. Olympus SZ-12 Back Case Replacement: adım 2, 1 resimden 1.

    • There are four screws to take out on the bottom of the camera.

    Düzenle

  4. Olympus SZ-12 Back Case Replacement: adım 3, 1 resimden 1.

    • There are three screws to take out on this side.

    Düzenle

  5. Olympus SZ-12 Back Case Replacement: adım 4, 1 resimden 1.

    • There is one screw to take out on this side.

    Düzenle

  6. Olympus SZ-12 Back Case Replacement: adım 5, 1 resimden 1.

    • There is one hidden screw inside the HDMI port.

    Düzenle

  7. Olympus SZ-12 Back Case Replacement: adım 6, 1 resimden 1.

    • Using the blue plastic opening tool, wedge open and remove the case.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 474