Remove the 2 screws from the bottom of the camera
  • Remove the 2 screws from the bottom of the camera

Yorum Ekle

Remove the screw from the right side of the camera.
  • Remove the screw from the right side of the camera.

Yorum Ekle

  • Remove the two screws from the left side of the camera

Yorum Ekle

  • Separate the front casing from the back using a plastic opening tool, gently.

  • Silver band and buttons will become loose when you remove the two pieces.

Yorum Ekle

  • Pull the silver bracket and buttons off of the camera

Yorum Ekle

  • Remove the 2 screws on the right side of the camera.

  • Remove the 2 screws on the left side of the camera.

  • Circuit ribbon is attached at the top-left of the camera. Be careful when separating the front and back of the camera.

  • Pull the camera apart into 2 separate pieces.

Yorum Ekle

  • Flip up clip on circuit ribbon, carefully

  • Detach the ribbon from the rear to the front and pull it out, gently.

Yorum Ekle

  • You will be left with four major pieces

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Tracy Donovan

Üyelik tarihi: 10-02-2012

13 İtibar

1 Kılavuz yazıldı

Takım

James Madison, Team 3-3, Klein Spring 2012 James Madison, Team 3-3, Klein Spring 2012 üyesi

JMU-KLEIN-S12S3G3

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 378