Eşyalarını Tamir Et Topluluk Mağaza

Olympus Stylus Tough-8010 Side Panel Replacement

Giriş

Use this guide to remove the side panel of the Olympus Stylus Tough-8010 camera.

Neye ihtiyacın var

  1. Olympus Stylus Tough-8010 Side Panel Replacement, Side Panel: adım 1, 3 resimden 1. Olympus Stylus Tough-8010 Side Panel Replacement, Side Panel: adım 1, 3 resimden 2. Olympus Stylus Tough-8010 Side Panel Replacement, Side Panel: adım 1, 3 resimden 3.

    • Remove the three screws (3.2mm) from the front panel using a T-6 screwdriver.

    • Take off the smaller front panel cover.

    • Carefully remove the larger front cover.

    Düzenle

  2. Olympus Stylus Tough-8010 Side Panel Replacement: adım 2, 3 resimden 1. Olympus Stylus Tough-8010 Side Panel Replacement: adım 2, 3 resimden 2. Olympus Stylus Tough-8010 Side Panel Replacement: adım 2, 3 resimden 3.

    • Remove the top two screws (4.1mm) using a #000 Phillips head screwdriver.

    • Remove the two screws (7.9mm) near the control pad. Set metal connector aside.

    • Remove the side panel casing.

    Düzenle

  4. Olympus Stylus Tough-8010 Side Panel Replacement: adım 3, 3 resimden 1. Olympus Stylus Tough-8010 Side Panel Replacement: adım 3, 3 resimden 2. Olympus Stylus Tough-8010 Side Panel Replacement: adım 3, 3 resimden 3.

    • Using a #000 Philips head screwdriver, remove the two screws (4.1mm) on the right side of the camera.

    • Remove the two screws (4.1mm) from the bottom of the camera.

    • Remove the single screw (3.2mm) from the front of the camera.

    Düzenle

  5. Olympus Stylus Tough-8010 Side Panel Replacement: adım 4, 2 resimden 1. Olympus Stylus Tough-8010 Side Panel Replacement: adım 4, 2 resimden 2.

    • Carefully remove the front panel piece.

    • Remove the screw (7.9mm) from the bottom left hand corner using a #000 Phillips head screwdriver.

    Düzenle

  6. Olympus Stylus Tough-8010 Side Panel Replacement: adım 5, 3 resimden 1. Olympus Stylus Tough-8010 Side Panel Replacement: adım 5, 3 resimden 2. Olympus Stylus Tough-8010 Side Panel Replacement: adım 5, 3 resimden 3.

    • Slightly bend the metal that is covering the side panel axle.

    • Using a paperclip, completely push out the metal bar that holds the side panel to the camera.

    • Remove the side panel door.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

James G Payne

Üyelik tarihi: 03/23/15

225 İtibar

2 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Baylor, Team 7-15, Williams Spring 2015 Baylor, Team 7-15, Williams Spring 2015 üyesi

BU-WILLIAMS-S15S7G15

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 7

Son 30 gün: 14

Her zaman: 352