Eşyalarını Tamir Et Topluluk Mağaza

Olympus TG-820 iHS LCD Screen Replacement

Giriş

Is your LCD screen unresponsive or not working properly? This guide will explain how to replace the LCD screen.

Neye ihtiyacın var

  1. Olympus TG-820 iHS LCD Screen Replacement, Battery: adım 1, 1 resimden 1.

    • Orient camera to look directly at battery compartment side as shown.

    Düzenle

  2. Olympus TG-820 iHS LCD Screen Replacement: adım 2, 3 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 2, 3 resimden 2. Olympus TG-820 iHS LCD Screen Replacement: adım 2, 3 resimden 3.

    • Locate the two latches on the battery compartment.

    • First, move the "lock" switch left to reveal red indicator.

    • Next, move the "cover latch" switch downward to reveal red indicator.

    • You have to move the switches in that order for the compartment to unlatch.

    Düzenle

  3. Olympus TG-820 iHS LCD Screen Replacement: adım 3, 2 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 3, 2 resimden 2.

    • Allow the battery compartment latch to completely open.

    • Insert battery with the writing face up.

    • The bigger slot is for the battery. The smaller slot is for the memory card.

    • Battery not shown.

    Düzenle

  4. Olympus TG-820 iHS LCD Screen Replacement, Back Case: adım 4, 1 resimden 1.

    • Orient the camera so you are looking at the bottom.

    • Remove the three 3.85mm Phillips #00 screws from the bottom of the camera.

    Düzenle

  5. Olympus TG-820 iHS LCD Screen Replacement: adım 5, 1 resimden 1.

    • Orient the camera so you are looking at the side plate.

    • Remove the two 3.15mm Phillips #00 screws from the side plate of the camera.

    Düzenle

  7. Olympus TG-820 iHS LCD Screen Replacement: adım 6, 2 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 6, 2 resimden 2.

    • Orient the camera so you are looking at the front plate.

    • Remove the two 3.8mm with the Phillips H1.5 from the front plate.

    • Remove the "Olympus" plate.

    Düzenle

  8. Olympus TG-820 iHS LCD Screen Replacement: adım 7, 1 resimden 1.

    • Remove face plate.

    Düzenle

  9. Olympus TG-820 iHS LCD Screen Replacement: adım 8, 3 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 8, 3 resimden 2. Olympus TG-820 iHS LCD Screen Replacement: adım 8, 3 resimden 3.

    • Locate three small black screws inside of the battery compartment.

    • Remove the 3.85mm Phillips #00 screw on the far left side.

    • Remove the two 5mm Phillips #00 screws on the right side

    Düzenle

  10. Olympus TG-820 iHS LCD Screen Replacement: adım 9, 3 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 9, 3 resimden 2. Olympus TG-820 iHS LCD Screen Replacement: adım 9, 3 resimden 3.

    • Orient the camera to be look at the top.

    • Remove the 5.4mm Phillips #00 screw on the top left side.

    • Remove the 7.4mm Phillips #00 screw next to the "ON/OFF" label.

    • Pry off top button plate with black nylon spudger.

    Düzenle

  11. Olympus TG-820 iHS LCD Screen Replacement: adım 10, 2 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 10, 2 resimden 2.

    • Rotate to bottom of camera and locate bottom latch.

    • Wedge black nylon spudger in between bottom latch and camera base to release LCD Screen from camera.

    • Push firmly apart.

    • Some buttons might fall out.

    Düzenle

  12. Olympus TG-820 iHS LCD Screen Replacement: adım 11, 3 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 11, 3 resimden 2. Olympus TG-820 iHS LCD Screen Replacement: adım 11, 3 resimden 3.

    • Orient the camera to the LCD screen side that is now wedged open.

    • Locate the white ribbon cable and pull out from motherboard.

    • Locate the brown ribbon cable and pull out from motherboard.

    Düzenle

  13. Olympus TG-820 iHS LCD Screen Replacement, LCD Screen: adım 12, 1 resimden 1.

    • Now that ribbons are detached, orient plate as shown.

    • Remove the four black 2mm Phillips #00 screws.

    Düzenle

  14. Olympus TG-820 iHS LCD Screen Replacement: adım 13, 2 resimden 1. Olympus TG-820 iHS LCD Screen Replacement: adım 13, 2 resimden 2.

    • Remove the six silver 3mm Phillips #00 screws.

    • Remove the last top 3.25mm Phillips #00 screw.

    Düzenle

  15. Olympus TG-820 iHS LCD Screen Replacement: adım 14, 1 resimden 1.

    • Using the black nylon spudger, pry out the metal plate.

    • This metal plate is the LCD component needing to be replaced

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Leslie Cade

Üyelik tarihi: 03/21/16

343 İtibar

3 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Clemson, Team 7-2, Benson Spring 2016 Clemson, Team 7-2, Benson Spring 2016 üyesi

CLEM-BENSON-S16S7G2

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 11

Her zaman: 3,250