Ana içeriğe geç

Olympus VR-350 Back Plate Replacement

Neye ihtiyacın var

  1. Olympus VR-350 Back Plate Replacement, Front Plate: adım 1, 2 resimden 1. Olympus VR-350 Back Plate Replacement, Front Plate: adım 1, 2 resimden 2.
    • Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.

  2. Olympus VR-350 Back Plate Replacement: adım 2, 1 resimden 1.
    • Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.

  3. Olympus VR-350 Back Plate Replacement: adım 3, 3 resimden 1. Olympus VR-350 Back Plate Replacement: adım 3, 3 resimden 2. Olympus VR-350 Back Plate Replacement: adım 3, 3 resimden 3.
    • Use the plastic opening tools and your fingers to pry the front plate from the camera.

    • You might need to open the battery cover to remove the front plate.

  4. Olympus VR-350 Back Plate Replacement, Back Plate: adım 4, 2 resimden 1. Olympus VR-350 Back Plate Replacement, Back Plate: adım 4, 2 resimden 2.
    • Use your fingers to pry open the back cover.

    • When you remove the back of the camera, the button membrane might fall out. Don’t lose this sheet.

    • The LCD screen is connected to the body of the camera by an orange ribbon cable. Don’t pull this ribbon cable out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Adri

Üyelik tarihi: 02/23/15

456 İtibar

3 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 1-3, Leahy Winter 2015 USF Tampa, Team 1-3, Leahy Winter 2015 üyesi

USFT-LEAHY-W15S1G3

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 12

Her zaman: 668