Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

The front case of the Omaker M4 provides a protective layer for the speaker cone. Once the front case is removed, the speaker can be accessed.

Parçalar

Hiçbir parça belirtilmedi.

  1. Flip the device over so the front of the device is facing upwards. Make sure to place the speaker on a flat surface
    • Flip the device over so the front of the device is facing upwards. Make sure to place the speaker on a flat surface

  2. Use a T6 Torx Screwdriver to remove the four screws from the front of the device. Use a T6 Torx Screwdriver to remove the four screws from the front of the device.
    • Use a T6 Torx Screwdriver to remove the four screws from the front of the device.

  3. Use a magnet to remove the screws after unscrewing them and place them aside.
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Carefully remove the front case by gently pulling it from the body of the device. Carefully remove the front case by gently pulling it from the body of the device.
    • Carefully remove the front case by gently pulling it from the body of the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Andrew Entwistle

Üyelik tarihi: 17-02-2016

679 İtibar

4 adet Kılavuz yazıldı

Takım

USF Tampa, Team 2-2, Sullivan Spring 2016 USF Tampa, Team 2-2, Sullivan Spring 2016 üyesi

USFT-SULLIVAN-S16S2G2

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 515