Ana içeriğe geç

One Education Infinity:One Antenna Prerequisite

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. One Education Infinity:One Antenna Prerequisite, Battery: adım 1, 2 resimden 1. One Education Infinity:One Antenna Prerequisite, Battery: adım 1, 2 resimden 2.
    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

  2. One Education Infinity:One Antenna Prerequisite: adım 2, 3 resimden 1. One Education Infinity:One Antenna Prerequisite: adım 2, 3 resimden 2. One Education Infinity:One Antenna Prerequisite: adım 2, 3 resimden 3.
    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

  3. One Education Infinity:One Antenna Prerequisite: adım 3, 3 resimden 1. One Education Infinity:One Antenna Prerequisite: adım 3, 3 resimden 2. One Education Infinity:One Antenna Prerequisite: adım 3, 3 resimden 3.
    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

  4. One Education Infinity:One Antenna Prerequisite: adım 4, 1 resimden 1.
    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

  5. One Education Infinity:One Antenna Prerequisite, Antenna: adım 5, 2 resimden 1. One Education Infinity:One Antenna Prerequisite, Antenna: adım 5, 2 resimden 2.
    • Use ESD safe tweezers to disconnect the antenna from the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Taylor Bratsch

Üyelik tarihi: 09/06/16

5.730 İtibar

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 45