Ana içeriğe geç

One by Wacom Medium Disassembly

Neye ihtiyacın var

  1. One by Wacom Medium Disassembly, Preparing the device: adım 1, 2 resimden 1. One by Wacom Medium Disassembly, Preparing the device: adım 1, 2 resimden 2.
    • Remove the pen from the pen holder

  2. One by Wacom Medium Disassembly, Remove screws: adım 2, 2 resimden 1. One by Wacom Medium Disassembly, Remove screws: adım 2, 2 resimden 2.
    • Remove four rubber feet to reveal four Phillips #1 screws

    • Remove four Phillips #1 screws

  3. One by Wacom Medium Disassembly, Pry it open: adım 3, 2 resimden 1. One by Wacom Medium Disassembly, Pry it open: adım 3, 2 resimden 2.
    • Use plastic pry tool to open the casing

    • To make this process easier, start prying from corners

    • Continue prying on every side till two casing sides are separated

  4. One by Wacom Medium Disassembly: adım 4, 3 resimden 1. One by Wacom Medium Disassembly: adım 4, 3 resimden 2. One by Wacom Medium Disassembly: adım 4, 3 resimden 3.
    • Remove the mainboard from the casing

    • If the USB port has to be replaced, be sure to remove the shielding from the back of the mainboard to avoid damaging it by high temperature

Sonuç

To reassemble your device, follow these instructions in reverse order.

00004707

Üyelik tarihi: 07/23/20

1.055 İtibar

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 22

Son 30 gün: 80

Her zaman: 2,556