Open Case

Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

This guide will help you open the case of your Jura Impressa F50 to get to the inner parts.

Neye ihtiyacın var

Adım 1 Open Case

Open Case, Open Case: adım 1, 3 resimden 1.

Open Case, Open Case: adım 1, 3 resimden 2.

Open Case, Open Case: adım 1, 3 resimden 3.

Clean the coffee machine before starting as well as possible and remove any remaining coffee bean debris, etc.
Pull the power plug before working on the coffee machine!
Never submerge the coffee machine completely under water.
Remove the drip pan, tray and container for used coffee,...
... the water tank, ...
and the aroma protection cover.

Çevir

Adım 2

One hurdle: the back is attached with four special oval-head screws. They look like rivets. To remove them, you need an oval-head bit. In a pinch, you can also use a good pair of pliers.

Çevir

Adım 3

Remove the two T15 Torx screws from the coffee machine housing cover.

Çevir

Adım 4

Remove the top cover of the coffee machine.

Çevir

Adım 5

Remove the panel from the right side.
Slightly lift the side panel at the back and then pull it out backwards with a little effort. Especially when disassembling it for the first time, the force required for this can be quite high.

Çevir

Adım 6

Remove the left side panel.
A light tap on the back of the recess for the water tank can help to loosen the side panel.

Çevir

Sonuç

Do you need help extracting the grinder of your Jura Impressa F50 to service it or replace it? Then check out the guide "Extract and Replace Grinder".

10 farklı kişi bu kılavuzu tamamladı.

Bu çevirmenlere özel teşekkürler:

de en

100%