Eşyalarını Tamir Et Topluluk Mağaza

Open the rear cover of the Saeco Exprelia

Giriş

Most repairs start with the removal of the rear cover. This one is fastened with two screws on the bottom and two bayonet-like locks on the top.

These instructions may also help with other Saeco models and with coffee makers from Philips and Gaggia—they are all made by the same manufacturer and have a very similar design.

Neye ihtiyacın var

  1. Open the rear cover of the Saeco Exprelia, remove back cover: adım 1, 1 resimden 1.

    • Remove all accessory parts like the water reservoir, the brewing assembly as well as the drip try.

    • Remove all coffee beans from the bean container

    • Always remove the power cord

    • Remove the two T10 Torx screws from the bottom of the rear cover.

    Çevir

  3. Open the rear cover of the Saeco Exprelia: adım 2, 1 resimden 1.

    • Pull the back cover approximately 1 cm (3/8inch) out from the bottom and push it in an upward direction.

    Çevir
Sonuç

To reassemble your device, follow these instructions in reverse order

Bu çevirmenlere özel teşekkürler:

de en

100%

oldturkey03

Maria Parker

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Yazar

2 tane daha katılımcı ile

VauWeh

Üyelik tarihi: 10/19/15

212.879 İtibar

265 adet Kılavuz yazıldı

Rozetler: 45

+42 tane daha rozet

Ekip

Repair is War on Entropy Repair is War on Entropy üyesi

Community

27 Üyeler

1.209 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 6

Son 30 gün: 13

Her zaman: 1,205