Ana içeriğe geç

What you need

  1. Opening the Galaxy Watch, Opening Procedure: adım 1, 1 resimden 1.
    • Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.

  2. Opening the Galaxy Watch: adım 2, 2 resimden 1. Opening the Galaxy Watch: adım 2, 2 resimden 2.
    • Use an opening tool to get between the back cover and the metal housing of the watch.

    • Carefully pry the plastic back cover open.

    • Don't remove the back cover yet. There is a flex cable running to the core assembly inside.

  3. Opening the Galaxy Watch: adım 3, 2 resimden 1. Opening the Galaxy Watch: adım 3, 2 resimden 2.
    • Lay down the watch and lift the back cover to access the sensor connector on the motherboard.

  4. Opening the Galaxy Watch: adım 4, 2 resimden 1. Opening the Galaxy Watch: adım 4, 2 resimden 2.
    • Use a spudger to disconnect the sensor flex cable from the motherboard.

  5. Opening the Galaxy Watch: adım 5, 3 resimden 1. Opening the Galaxy Watch: adım 5, 3 resimden 2. Opening the Galaxy Watch: adım 5, 3 resimden 3.
    • Remove the back cover.

    • When closing the watch make sure the rubber gasket is undamaged or replace it with a new one.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Tobias Isakeit

Üyelik tarihi: 31-03-2014

105.945 İtibar

186 adet Kılavuz yazıldı

Team

iFixit iFixit üyesi

Community

141 Üyeler

15.868 adet Kılavuz yazıldı

One Comment

I got 3 out of 4 screws out 1 screw just won't come out need help

peck24hi.mp - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 43

Son 30 gün: 213

Her zaman: 7,103