Giriş
By following the steps in this guide in order, you will be able to remove and replace the broken motherboard of your Oregon Scientific Meep! 4.0 tablet.
Neye ihtiyacın var
-
-
Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
-
-
-
-
Use a soldering station to disconnect any wires attached to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
University of Tampa, Team 1-3, Whiteside Fall 2015 University of Tampa, Team 1-3, Whiteside Fall 2015 üyesi
UT-WHITESIDE-F15S1G3
3 Üyeler
12 adet Kılavuz yazıldı
