Eşyalarını Tamir Et Topluluk Mağaza

Oster Blend-N-Go My Blend Drinking Lid Seal Replacement

Giriş

Use this guide to replace your old or damaged Drinking Lid Seal.

Neye ihtiyacın var

  1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: adım 1, 2 resimden 1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: adım 1, 2 resimden 2.

    • Grip the blender base with one hand and blender bottle with the other hand.

    • Rotate the blender bottle a quarter turn counterclockwise .

    • Lift the blender bottle out of the blender base. The blade assembly should still be attached to the blender bottle.

    Düzenle

  2. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 2, 3 resimden 1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 2, 3 resimden 2. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 2, 3 resimden 3.

    • Grip the blade assembly with one hand and blender bottle with the other hand.

    • Rotate the blade assembly counterclockwise until it is completely unscrewed from the blender bottle.

    • Lift the blender bottle to separate it from the blade assembly.

    Düzenle

  3. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Assembly: adım 3, 1 resimden 1.

    • After removing the blade assembly from the blender bottle, ensure that your drinking lid assembly has its seal placed in the seal bed.

    Düzenle

  5. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 4, 3 resimden 1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 4, 3 resimden 2. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 4, 3 resimden 3.

    • Grab the blender bottle with one hand and the drinking lid assembly with the other.

    • Place the drinking lid assembly onto the blender bottle and twist it clockwise until it is tight around the blender bottle.

    Düzenle

  6. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Seal: adım 5, 1 resimden 1.

    • After separating the drinking lid assembly from the blender bottle, position the plastic opening tool on either side of the seal in the drinking lid assembly.

    • Wedge the tool between seal and seal seat wall.

    Düzenle

  7. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 6, 2 resimden 1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 6, 2 resimden 2.

    • Gently pry the seal up while lifting seal out of the seal seat.

    Düzenle

  8. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 7, 2 resimden 1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: adım 7, 2 resimden 2.

    • Press new seal into seal seat with finger.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Paul Long

Üyelik tarihi: 08/27/15

710 İtibar

4 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

USF Tampa, Team 12-6, Blackwell Fall 2015 USF Tampa, Team 12-6, Blackwell Fall 2015 üyesi

USFT-BLACKWELL-F15S12G6

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 11

Her zaman: 840