Giriş
Since replacing the cable requires the use of a soldering iron, there is a risk of burning yourself or damaging the controllers logic board.
Neye ihtiyacın var
-
-
Loosen the seven 11 mm Phillips #0 screws located on the back of the controller.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
5 farklı kişi bu kılavuzu tamamladı.
4 Yorum
where can I find a replacement cable to perform this precedure with?
yes!! i would like to know too.. i have been searching for long time for that cable
Android cable
Wayne -