Eşyalarını Tamir Et Topluluk Mağaza

PDP Victrix Gambit Prime Bumper Replacement

Giriş

Replacing or making repairs to your controller's bumpers can prove to be quite difficult. We have provided clear instructions below to show you how to remove the case, separate the motherboards, and remove the bumpers, to ensure a more concise process.

Neye ihtiyacın var

  1. PDP Victrix Gambit Prime Bumper Replacement, Bumpers: adım 1, 1 resimden 1.

    • Insert an opening tool in the gap between the rear and front case.

    • Pry around the perimeter until the front case releases.

    • Remove the front case.

    Düzenle

  2. PDP Victrix Gambit Prime Bumper Replacement: adım 2, 2 resimden 1. PDP Victrix Gambit Prime Bumper Replacement: adım 2, 2 resimden 2.

    • Remove all seven 9 mm Phillips #000 screws securing the midframe.

    • Remove the midframe.

    Düzenle

  4. PDP Victrix Gambit Prime Bumper Replacement: adım 3, 1 resimden 1.

    • Gently remove the two 6 mm Phillips #00 screws that secure the PCB.

    Düzenle

  5. PDP Victrix Gambit Prime Bumper Replacement: adım 4, 2 resimden 1. PDP Victrix Gambit Prime Bumper Replacement: adım 4, 2 resimden 2.

    • Remove the four 6 mm Phillips #000 screws that secure the trigger assemblies.

    • Remove the trigger assemblies.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Tessa Baldwin

Üyelik tarihi: 08/28/24

605 İtibar

5 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

University of North Texas, Team 5-6, Kilpatrick Fall 2024 University of North Texas, Team 5-6, Kilpatrick Fall 2024 üyesi

UNT-KILPATRICK-F24S5G6

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 12

Son 30 gün: 63

Her zaman: 225