Giriş

Steps for replacing the outer casing of a Sony PSP-3000.

  1. Place the PSP face down and locate the battery cover on the left side of the device.
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

    Yorum Ekle

  2. Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

    Yorum Ekle

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

      • Two are located behind the battery's warranty sticker.

      • Two are located on the right side of the PSP.

    Yorum Ekle

    • Next, unscrew the two screws located at the top of the PSP.

    Yorum Ekle

    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

    Yorum Ekle

    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

16 başka kişi bu kılavuzu tamamladı.

kbrunner

Üyelik tarihi: 05-11-2009

29 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 19-2, Maness Fall 2009 Cal Poly, Team 19-2, Maness Fall 2009 üyesi

CPSU-MANESS-F09S19G2

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 20

Son 30 Gün: 83

Her zaman: 7,097