Eşyalarını Tamir Et Topluluk Mağaza

PSP 300xc UMD Drive Replacement

Giriş

Can your PSP 300xc no longer read UMDs? Replace your faulty UMD drive to get back in the game!

Neye ihtiyacın var

  1. PSP 300xc UMD Drive Replacement, Battery: adım 1, 2 resimden 1. PSP 300xc UMD Drive Replacement, Battery: adım 1, 2 resimden 2.

    • Press the button securing the battery door to the PSP 300xc, and lift the battery door off.

    • Lift the battery out of the PSP.

    Düzenle

  2. PSP 300xc UMD Drive Replacement, Front Case: adım 2, 1 resimden 1.

    • Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray

    Düzenle

  3. PSP 300xc UMD Drive Replacement: adım 3, 2 resimden 1. PSP 300xc UMD Drive Replacement: adım 3, 2 resimden 2.

    • Remove four Phillips screws from the back of the PSP.

    Düzenle

  4. PSP 300xc UMD Drive Replacement: adım 4, 1 resimden 1.

    • Remove two Phillips screws from the top of the PSP.

    Düzenle

  5. PSP 300xc UMD Drive Replacement: adım 5, 1 resimden 1.

    • Remove a single screw from the bottom edge of the PSP.

    Düzenle

  6. PSP 300xc UMD Drive Replacement: adım 6, 2 resimden 1. PSP 300xc UMD Drive Replacement: adım 6, 2 resimden 2.

    • Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.

    Düzenle

  7. PSP 300xc UMD Drive Replacement, LCD: adım 7, 1 resimden 1.

    • Remove a single Phillips screw securing the home bar to the PSP 300xc.

    Düzenle

  8. PSP 300xc UMD Drive Replacement: adım 8, 2 resimden 1. PSP 300xc UMD Drive Replacement: adım 8, 2 resimden 2.

    • Push the home bar to the right about 1cm to release a tab, and begin to lift the right end of the home bar slightly.

    • Do not attempt to remove the home bar yet, it is still attached to the PSP 300xc.

    Düzenle

  10. PSP 300xc UMD Drive Replacement: adım 9, 1 resimden 1.

    • Insert a spudger under the LCD, beside the black plastic tab.

    • Push the LCD to the left and pry up to release the left edge of the LCD from under the plastic tab.

    Düzenle

  11. PSP 300xc UMD Drive Replacement: adım 10, 1 resimden 1.

    • Insert a spudger under the LCD, beside the black plastic tab.

    • Push the LCD to the right and pry up to release the right edge of the LCD from under the plastic tab.

    Düzenle

  12. PSP 300xc UMD Drive Replacement: adım 11, 3 resimden 1. PSP 300xc UMD Drive Replacement: adım 11, 3 resimden 2. PSP 300xc UMD Drive Replacement: adım 11, 3 resimden 3.

    • Rotate the LCD away from the PSP to reveal the LCD and home bar ribbon cables.

    • Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on the following four ZIF connectors:

    • Home bar cable

    • Microphone cable

    • LCD display data cable

    • Touchscreen cable

    • Be sure you are prying up on the retaining flap, not the socket itself

    • After flipping up the locking tabs on all four connectors, use your fingers or a spudger to gently pull the cables straight out of the connectors.

    Düzenle

  13. PSP 300xc UMD Drive Replacement: adım 12, 1 resimden 1.

    • Remove the LCD from the PSP 300xc.

    Düzenle

  14. PSP 300xc UMD Drive Replacement, Home Bar: adım 13, 3 resimden 1. PSP 300xc UMD Drive Replacement, Home Bar: adım 13, 3 resimden 2. PSP 300xc UMD Drive Replacement, Home Bar: adım 13, 3 resimden 3.

    • Lift the home bar up as high as it will go, but not so high that the wires disconnect.

    • Try to bend the small tab under the silver rim as little as possible it the following steps. The more you bend, the more likely it will snap.

    • Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.

    • The home bar should now lift out of the PSP 300xc.

    Düzenle

  15. PSP 300xc UMD Drive Replacement, UMD Brace: adım 14, 1 resimden 1.

    • Using the flat edge of a spudger, pry the power board away from the PSP 300xc.

    Düzenle

  16. PSP 300xc UMD Drive Replacement: adım 15, 1 resimden 1.

    • Lift the right silver rim up and off the PSP 300xc.

    Düzenle

  17. PSP 300xc UMD Drive Replacement: adım 16, 1 resimden 1.

    • Using the pointed end of a spudger, pull the UMD door spring to the left, and remove it from the PSP.

    Düzenle

  18. PSP 300xc UMD Drive Replacement: adım 17, 3 resimden 1. PSP 300xc UMD Drive Replacement: adım 17, 3 resimden 2. PSP 300xc UMD Drive Replacement: adım 17, 3 resimden 3.

    • Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD drive ribbon socket.

    • Be sure you are prying up on the retaining flap, not the socket itself

    • Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.

    • Use a spudger to gently pull both ribbon cables straight out of their sockets.

    Düzenle

  19. PSP 300xc UMD Drive Replacement: adım 18, 2 resimden 1. PSP 300xc UMD Drive Replacement: adım 18, 2 resimden 2.

    • Flip the PSP 300xc over and open the UMD door.

    • Using a pair of tweezers, grab the small rubber square between the metal UMD brace and case, and lift it out of the PSP 300xc.

    • Repeat for the rubber square on the other side of the UMD door.

    Düzenle

  20. PSP 300xc UMD Drive Replacement: adım 19, 3 resimden 1. PSP 300xc UMD Drive Replacement: adım 19, 3 resimden 2. PSP 300xc UMD Drive Replacement: adım 19, 3 resimden 3.

    • Slide the UMD brace toward the top of the UMD door until the brace disconnects from the door. Remove the brace.

    Düzenle

  21. PSP 300xc UMD Drive Replacement, UMD Door: adım 20, 2 resimden 1. PSP 300xc UMD Drive Replacement, UMD Door: adım 20, 2 resimden 2.

    • Bend the PSP 300xc case while pulling up on the right edge of the UMD door until the right edge lifts free.

    • Remove the UMD door.

    Düzenle

  22. PSP 300xc UMD Drive Replacement, UMD Drive: adım 21, 1 resimden 1.

    • Remove the four Phillips screws securing the UMD drive to the PSP 300xc.

    Düzenle

  23. PSP 300xc UMD Drive Replacement: adım 22, 1 resimden 1.

    • Lift the UMD drive out of the PSP 300xc, minding any cables that may get caught.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Matthew Newsom

Üyelik tarihi: 01/05/10

39.496 İtibar

67 adet Kılavuz yazıldı

Rozetler: 47

+44 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 39

Her zaman: 7,731