Palm IIIc Button Pad Replacement - iFixit Tamir Kılavuzu

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Giriş

Follow this guide to learn how to replace your non-functioning button pad.

Neye ihtiyacın var

Adım 1 Removing broken LCD screen

Palm IIIc Button Pad Replacement, Removing broken LCD screen: adım 1, 1 resimden 1.

Keep track of all pieces removed from the device.
Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

Adım 2

Palm IIIc Button Pad Replacement: adım 2, 1 resimden 1.

Using a Phillips head screwdriver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

Adım 3 Remove the Front Cover

Palm IIIc Button Pad Replacement, Remove the Front Cover: adım 3, 1 resimden 1.

Lay Palm IIIc face-up and remove the front cover.
Do this firmly but not with too much force so as to not break or disturb anything you're not supposed to.

Adım 4 Button Pad

Palm IIIc Button Pad Replacement, Button Pad: adım 4, 2 resimden 1.

Palm IIIc Button Pad Replacement, Button Pad: adım 4, 2 resimden 2.

Using a prying tool, carefully pop button pad out of the cover.

Adım 5

Palm IIIc Button Pad Replacement: adım 5, 1 resimden 1.

Insert the new button pad where the old one used to be.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Paulina Trujillo

Üyelik tarihi: 04/07/11

265 İtibar

8 adet Kılavuz yazıldı

+4 tane daha rozet

Ekip

Cal Poly, Team 20-69, Walters Spring 2011 Cal Poly, Team 20-69, Walters Spring 2011 üyesi

CPSU-WALTERS-S11S20G69

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,348