Giriş

Installing a new motherboard assembly which contains the processor and software package.

Parçalar

Hiçbir parçaya gerek yok.

Place the Palm IIIx face down on a flat surface.
  • Place the Palm IIIx face down on a flat surface.

Yorum Ekle

Push down, lift up on, and remove battery cover.
  • Push down, lift up on, and remove battery cover.

Yorum Ekle

Remove the old batteries one at a time.
  • Remove the old batteries one at a time.

Yorum Ekle

Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.
  • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

Yorum Ekle

Hold the device on its side, positioning your hands as shown.
  • Hold the device on its side, positioning your hands as shown.

  • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers.

Yorum Ekle

Hold the screen and front cover on its side, facing the screen inward as shown.
  • Hold the screen and front cover on its side, facing the screen inward as shown.

  • Position your hands so that you can push the screen outward with your thumbs.

  • Remove the screen by pushing outward with your thumbs. Use your index fingers to hold the front cover in place.

Yorum Ekle

Position the device with the screen facing down. Locate the white ribbon wire on the left hand side of the device.
  • Position the device with the screen facing down.

  • Locate the white ribbon wire on the left hand side of the device.

  • On either side of the ribbon wire are two white clasps. Gently push the two clasps away from the board (to the left).

Yorum Ekle

Detach the ribbon wire by gently pulling it out of its connector.
  • Detach the ribbon wire by gently pulling it out of its connector.

Yorum Ekle

Separate the motherboard from the screen.
  • Separate the motherboard from the screen.

Yorum Ekle

Now the motherboard assembly can be replaced successfully.
  • Now the motherboard assembly can be replaced successfully.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ben Johnson

Üyelik tarihi: 26-01-2010

22 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 14-43, Regan Winter 2010 Cal Poly, Team 14-43, Regan Winter 2010 üyesi

CPSU-REGAN-W10S14G43

5 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Her zaman: 2,702