Giriş

Removing the batteries is a very simple process that is also a preliminary step to gaining access to the inside of the device.

Turn the device over so it is face down and remove the stylus, and battery cover. Turn the device over so it is face down and remove the stylus, and battery cover. Turn the device over so it is face down and remove the stylus, and battery cover.
  • Turn the device over so it is face down and remove the stylus, and battery cover.

Yorum Ekle

Now remove the two batteries by pulling on the cloth black tab. Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.
  • Now remove the two batteries by pulling on the cloth black tab.

    • Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.

  • If this tab is not visible, use the flat head screwdriver and gently pry out the batteries by pushing on the positive end (opposite the spring).

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jacob

Üyelik tarihi: 15-04-2010

1 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 16-1, Maness Spring 2010 Cal Poly, Team 16-1, Maness Spring 2010 üyesi

CPSU-MANESS-S10S16G1

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,543