Ana içeriğe geç

Giriş

This guide will teach you how to replace the flash bulb on the back of the phone.

  1. Push in the button at the bottom of the phone, and lift the back cap off.
    • Push in the button at the bottom of the phone, and lift the back cap off.

  2. Remove the battery by pulling out the little tab.
    • Remove the battery by pulling out the little tab.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.
    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

  5. Using the spudger, remove the inner case from the phone.
    • Using the spudger, remove the inner case from the phone.

  6. Using your spudger, slowly apply pressure on the bulb until it comes loose. Using your spudger, slowly apply pressure on the bulb until it comes loose.
    • Using your spudger, slowly apply pressure on the bulb until it comes loose.

Sonuç

To reassemble your device, follow these instructions in reverse order.

ironwill13791

Üyelik tarihi: 30-10-2013

509 İtibar

5 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 üyesi

UMASSD-GULBRANDSEN-F13S2G2

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 139