Eşyalarını Tamir Et Topluluk Mağaza

Palm Pre 2 Motherboard Replacement

Giriş

The following guide will show the reader how to properly remove the motherboard from the Palm Pre 2.

Neye ihtiyacın var

  1. Palm Pre 2 Motherboard Replacement, Motherboard: adım 1, 2 resimden 1. Palm Pre 2 Motherboard Replacement, Motherboard: adım 1, 2 resimden 2.

    • Make sure your Palm Pre 2 is turned off before taking apart the phone.

    • Snap off the back panel to reveal the battery using the opening tool.

    Düzenle

  2. Palm Pre 2 Motherboard Replacement: adım 2, 3 resimden 1. Palm Pre 2 Motherboard Replacement: adım 2, 3 resimden 2. Palm Pre 2 Motherboard Replacement: adım 2, 3 resimden 3.

    • Pull on the tab to remove the battery.

    Düzenle

  3. Palm Pre 2 Motherboard Replacement: adım 3, 2 resimden 1. Palm Pre 2 Motherboard Replacement: adım 3, 2 resimden 2.

    • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

    Düzenle

  5. Palm Pre 2 Motherboard Replacement: adım 4, 2 resimden 1. Palm Pre 2 Motherboard Replacement: adım 4, 2 resimden 2.

    • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas (Reference the red box in the image).

    • Use tweezers to remove the two antennas from the keypad control board.

    Düzenle

  6. Palm Pre 2 Motherboard Replacement: adım 5, 2 resimden 1. Palm Pre 2 Motherboard Replacement: adım 5, 2 resimden 2.

    • Use the opening tool to pry off the (black and yellow) back frame.

    Düzenle

  7. Palm Pre 2 Motherboard Replacement: adım 6, 3 resimden 1. Palm Pre 2 Motherboard Replacement: adım 6, 3 resimden 2. Palm Pre 2 Motherboard Replacement: adım 6, 3 resimden 3.

    • Use the opening tool to remove the panel on the main part of the phone.

    • Use the tweezers to get access to remove the panel giving access to the cable connectors.

    • Remove the two ribbon cable connectors using the tweezers.

    Düzenle

  8. Palm Pre 2 Motherboard Replacement: adım 7, 1 resimden 1.

    • Use tweezers to separate the keyboard from the phone.

    Düzenle

  9. Palm Pre 2 Motherboard Replacement: adım 8, 2 resimden 1. Palm Pre 2 Motherboard Replacement: adım 8, 2 resimden 2.

    • Use a Phillips #0 screwdriver to remove the remaining 4 screws from the main portion of the phone.

    • Use an opening tool to remove the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Cole Simmerman

Üyelik tarihi: 01/08/18

160 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

IUPUI, Team S1-G6, Freund Spring 2018 IUPUI, Team S1-G6, Freund Spring 2018 üyesi

IUPUI-FREUND-S18S1G6

2 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 257