Ana içeriğe geç

Palm TX Back Panel Replacement

Neye ihtiyacın var

  1. Palm TX Back Panel Replacement, Back Panel: adım 1, 2 resimden 1. Palm TX Back Panel Replacement, Back Panel: adım 1, 2 resimden 2.
    • Orient the device so that the display faces forward.

    • Remove the stylus from the right side.

  2. Palm TX Back Panel Replacement: adım 2, 1 resimden 1.
    • Turn over the device so that the back panel faces forward.

    • Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

  3. Palm TX Back Panel Replacement: adım 3, 2 resimden 1. Palm TX Back Panel Replacement: adım 3, 2 resimden 2.
    • Rotate the device so that the display faces forward.

    • Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

    • Pry along the crevice to loosen the back panel.

    • Repeat this process for the right side.

  4. Palm TX Back Panel Replacement: adım 4, 2 resimden 1. Palm TX Back Panel Replacement: adım 4, 2 resimden 2.
    • Carefully pry the back panel to open the device.

    • Be careful not to break the wire that connects the battery pack to the motherboard.

    • When reassembling, snap the back panel back into place and then insert the top cover.

  5. Palm TX Back Panel Replacement: adım 5, 2 resimden 1. Palm TX Back Panel Replacement: adım 5, 2 resimden 2.
    • Use a plastic opening tool to peel the battery pack from the back panel.

    • The battery pack is glued to the back panel so removing it may require considerable effort.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Spencer Lewson

Üyelik tarihi: 01/19/11

793 İtibar

6 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 1-15, Amido Winter 2011 Cal Poly, Team 1-15, Amido Winter 2011 üyesi

CPSU-AMIDO-W11S1G15

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 1,539